Panel

Panel Door Vacuum Motor










Removal

1. Remove the plenum from the vehicle as outlined.

2. Reach through the defroster nozzle opening and remove the sleeve nut attaching the vacuum motor arm to the door.

3. Remove two screws attaching the vacuum motor to the mounting bracket.

4. Disengage the vacuum motor from the plenum and disconnect the vacuum hose from the vacuum motor.


Installation

1. Position the vacuum motor to the mounting bracket and the door bracket.

2. Install two screws to attach the motor to the mounting bracket.

3. Connect the vacuum motor arm to the panel door with a new sleeve nut.

4. Connect the vacuum hose to the vacuum motor.

5. Install the plenum in the vehicle as outlined.

6. Check the system for proper operation.