EB3 Checking Wiring Harness (Circuit 414)

^ Using an analog ohmmeter, measure and record the following:

^ Connect positive lead of ohmmeter to the wiring harness connector Pin 17 (Circuit 414) and negative lead to Pin 40 (Circuit 430G).

^ Connect positive lead of ohmmeter to wiring harness connector Pin 40 (Circuit 430G) and the negative lead to Pin 17 (Circuit 414).

^ Is at least one of the two ohmmeter readings greater than 8 ohms?

YES -- Go to EB5.

NO -- Go to EB4.