GB2 Right Front Actuator Visual Check

GB2 RIGHT FRONT ACTUATOR VISUAL CHECK

^ The air suspension control module did not receive a signal that right front shock actuator went to desired position when activated. In order to determine why this did not happen the following actions are required:

^ Examine four wires of right front actuator connector and also those wires on wiring harness side to ensure that there is no obvious damage and that all wires are in proper locations.

^ Are all wires in proper location with no obvious damage?

YES -- GO to GB3.

NO -- SERVICE wires as necessary and REPEAT Service Bay Diagnostics. Reading and Clearing Diagnostic Trouble Codes