GC14 Wiring Harness Check (Circuit 846B)

GC14 WIRING HARNESS CHECK (CIRCUIT 846B)

^ Disconnect Soft Shock Relay from vehicle wiring harness connector.

^ Using an analog ohmmeter, place one lead to the Soft Shock Relay connector Circuit 846A and the other to the left front actuator's vehicle wiring harness connector Circuit 846B.

^ Is ohmmeter reading greater than 5 ohms?

NO -- GO to GC15.

YES -- SERVICE electrical problem in circuit. REPEAT Service Bay Diagnostics. Reading and Clearing Diagnostic Trouble Codes