GE1 Code 64 or 65 All Shock Actuators Not In Desired Position

^ The air suspension control module has detected that all shock actuators did not GO to desired position when activated. There are six possible causes of the actuator not switching to the desired position.

^ SOFT and/or FIRM shock relay is inoperative.

^ Vehicle wiring harness power supply circuit to shock actuator relay is shorted to ground or has an open in it.

^ Vehicle wiring harness power supply circuit to shock actuators is shorted to ground or has an open in it.

^ Shock actuator position circuit is shorted to ground or had an open in it.

^ Vehicle wiring harness connector for the SOFT and/or FIRM relay does not have all wires in correct location.

^ Air suspension control module is inoperative.

GO to GE2.