HA20 Inflate Right Front Air Spring

^ From the previous tests it has been determined that the cause of the venting problem is due to a restriction in the air line or compressor assembly. In order to isolate the cause of this problem the following actions are required:

^ Reconnect airline to right front solenoid valve.

^ Inflate right front corner of vehicle so that vehicle ride height is above normal position. Then release STAR teat button so that it remains in the up HOLD position after code 24 has been displayed for at least 5 seconds.

NOTE: As long as STAR test button remains in the up HOLD position the right front air spring will continue to be inflated. When the desired amount of inflating has occurred depress STAR test button so that it remains in the down TEST position.

^ Has vehicle's right front air spring been inflated so that right front corner of vehicle has approximately a 2 inch gap between fender lip opening and top of tire?

YES -- DEPRESS STAR test button down so that it remains in the TEST position. Then GO to HA21.

NO -- CONTINUE with Step HA2O until right front corner of vehicle is at desired position. If unable to depress STAR test button down to the TEST position, wait 10 minutes and REPEAT Step HA2O.