HC20 Inflate Right Rear Air Spring

^ From the previous tests, it has been determined that the cause of the venting problem is due to a restriction in the air line or compressor assembly. In order to isolate the cause of this problem the following actions are required:

^ Reconnect air line to right rear solenoid valve.

^ inflate right rear corner of vehicle so that vehicle ride height is above normal position. Then release STAR test button so that it remains in the up HOLD position after code 26 has been displayed for at least 5 seconds.

NOTE: As long as STAR Test button remains in the up HOLD position, the right rear air spring will continue to be inflated. When the desired amount of inflating has occurred depress STAR test button so that it remains in the down TEST position.

^ Has vehicles right rear air spring been inflated so that right rear corner of vehicle has approximately a 2 inch gap between fender lip opening and ton of tire?

YES -- DEPRESS STAR test button down so that it remains in the TEST position. Then GO to HC21.

NO -- CONTINUE with Step HC20 until right rear corner of vehicle is at desired position.