IB17 Spring Solenoid Valve Component Check

^ It is now desired to activate the Air Spring Solenoid Valve Cycle functional test. In order to do this the following actions are required:

^ Release STAR test button so that it remains in the up HOLD position after code 33 has been displayed for at least 5 seconds.

NOTE: As long as STAR test button is in the up HOLD position the selected functional test will continue. The Air Spring Solenoid Cycle test is used to verify that the air suspension control module can activate each of the air spring solenoid valves by cycling them ON and OFF continuously until STAR test button is depressed down again.

^ The right front air spring solenoid makes an audible click sound when voltage is applied:

Cycling on/off continuously -- GO to IB21.

Remains off -- GO to IB18.