IC23 Vent Right Rear Air Spring

^ In order to perform the right rear air spring inflation test, first vent it below the normal position. To do that, the following action is required:

^ Release STAR test button down so that it remains in the up HOLD position after code 23 has been displayed for at least 5 seconds.

^ Continue venting right rear corner of vehicle until gap between fender lip opening and top of tire is 1 inch or less.

NOTE: As long as STAR test button remains in the up HOLD position, the right rear air spring will continue to be vented. When desired amount of venting has occurred, depress STAR test button so that it remains in the TEST position.

^ Has vehicle's right rear corner been lowered?

YES -- DEPRESS STAR test button down so that it remains in the TEST position. Then GO to IC24.

NO -- CONTINUE with Step IC23 until desired height is reached.