IC25 Air Line Check (Slow Inflation)

^ In order to determine why the right rear corner of the vehicle is inflating very slowly or not at all, the following actions are required:

^ Disconnect right rear air line from right rear air spring solenoid valve.

^ Disconnect right rear air spring solenoid valve electrical connector so that the solenoid valve is not connected to vehicle wiring harness.

^ Release STAR test button so that it remains in the up HOLD position after code 26 has been displayed for at least 5 seconds.

NOTE: As long as STAR test button remains in the up HOLD position, the air compressor assembly will continue to pump air through the air line.

^ Air is coming out of the air line:

Very slowly or none at all -- GO to IC26.

At a normal rate -- GO to IC27.