ID23 Vent Left Rear Air Spring

^ In order to perform the left rear air spring inflation test, first vent it below the normal position. In order to do that the following actions are required:

^ Continue venting left rear corner of vehicle until gap between fender lip opening and top of tire is 1 inch or less.

NOTE: As long as STAR test button remains in the up HOLD position the left rear air spring will continue to be vented. When desired amount of venting has occurred depress STAR test button so that it remains in the down TEST position.

^ Has vehicle's left rear corner been lowered?

YES -- DEPRESS STAR test button down so that it remains in the TEST position. Then GO to ID24.

NO -- CONTINUE with Step ID23 until desired height is reached.