Antitheft Protection System - False Alarms
Article No.93-19-6
09/15/93
ANTI-THEFT PROTECTION SYSTEM - ALARM SOUNDS IN ERROR - HOOD SWITCH POSITIONED TOO LOW - VEHICLES BUILT BEFORE 2/15/93
LINCOLN-MERCURY:
1993 MARK VIII
ISSUE:
The anti-theft alarm may sound in error. This occurs because the hood switch is positioned too low.
ACTION:
Install a revised hood switch which will allow for proper positioning on the sheet metal. The new hood switch has an anti-rotation locating tab and raises the seating surface of the switch.
Inadvertent alarm actuation may be very difficult to duplicate. If a vehicle built prior to 2/15/93 is reported with an intermittent alarm actuation, replace the hood switch (F3LY-19A434-B). Also refer to TSB 93-12-7 for the door ajar switch replacement procedure.
1. Follow the normal diagnostic procedures as outlined in Section 01-14C of the 1993 Mark VIII Service Manual.
2. Replace the hood switch located on the right hand side of the engine compartment with a revised hood switch (F3LY-19A434-B). Refer to the 1993 Mark VIII Service Manual, Page 01-14C-15, for the installation procedure.
PART NUMBER PART NAME CLASS
F3LY-19A434-B Hood Switch C
OTHER APPLICABLE ARTICLES: 93-12-7, 93-19-5
WARRANTY STATUS:
Eligible Under Bumper To Bumper Warranty Coverage
OPERATION DESCRIPTION TIME
931906A Diagnose And Replace 0.9 Hr.
Hood Switch
DEALER CODING
BASIC PART NO. CONDITION CODE
19A434 36
OASIS CODES: 205000, 206000