System Operational Verification

1. Turn ignition switch from Off to Run position and visually monitor airbag indicator.
2. Indicator will illuminate for approximately six seconds, then turn off.
3. If an airbag system fault is present, the indicator will either fail to illuminate, remain lit continuously or flash.
4. Indicator flashing may not occur until approximately 30 seconds after the ignition switch has been turned to Run.
5. If an airbag system malfunction exists and the indicator is inoperative, an audible alarm of five sets of five beeps will sound. This indicates that the airbag indicator needs to be serviced before any airbag system diagnosis may be completed.