A/T - AODE Output Shaft Pin Location and Updated Shaft

TECHNICAL BULLETIN # 327

DATE: 1996

TRANSMISSION: AOD-E

SUBJECT: Output shaft pin location and updated shaft

APPLICATION: Ford

AOD-E Output Shaft Pin Location and Updated Shaft




Care should be taken when installing the seal pin, sleeve and snap-ring that is used with the first design output shaft. The second design output shaft does not have the feed holes. For this reason, the seal pin, sleeve and retaining snap-ring are no longer necessary.

Part numbers listed for general information.

PART # DESCRIPTION

391231-S (.185 x 1.80 STGT) Pin (line pressure feed blocker)
F2VY-7B176-A Sleeve (pin retainer)
388104-S (1" 19/32) Output sleeve snap-ring