Pinpoint Test F: Pre-Test Conditions

Pinpoint Test F contains a number of sub-sections, for handling different types of concerns found with the power locks as reported by the customer.

BEFORE PERFORMING ANY OF THE TESTS IN THIS SECTION, THE BATTERY MUST BE FULLY CHARGED.

Find the specific concern in the following list and go to the Step specified.

^ To lubricate linkage, use Multi-Purpose Grease Spray D7AZ-19584-AA (ESR-M1C159-A and ESB-M1C1O6-B) or equivalent.
^ Spray into latch opening
- It may be necessary to remove the door trim panel to lubricate the entire latch and linkage system.
^ Manually cycle the lock 10 times.
- Check for interference around latch and all linkages.