TG94 - Check For DTC 675

Diagnostic Trouble Code (DTC) 675 indicates the Manual Lever Position (MLP) circuit voltage was out of the expected range.

Possible causes:
- Damaged MLP sensor.
- Open in MLP harness SIG RTN circuit.
- Short to ground in MLP harness SIG circuit.
- Short to power in MLP harness SIG circuit.
- Damaged Powertrain Control Module (PCM).

- Did DTC 675 repeat during the drive cycle test?

Yes -- Go to TG95. TG95 - Check For DTC 675 With DTC 667

No -- Go to TG98. TG98 - Check For DTC 667