System Deactivation Procedures
Tools RequiredRotunda Air Bag Simulator 105-00010
1. Disconnect positive battery cable and wait one minute for backup power supply to deplete its energy.
2. Remove four nut and washer assemblies retaining driver air bag module to steering wheel.
NOTE: On vehicles with bucket seat and console - remove two plugs on side of steering wheel back cover and remove two air bag module retaining screws.
3. Disconnect driver side air bag module module connector.
4. Remove driver side air bag module from steering wheel.
WARNING: Place air bag module on bench with trim cover facing up.
5. Connect Rotunda Air Bag Simulator 105-00010 or equivalent to air bag sliding contact connector at top of steering column.
6. Remove passenger side air bag module.
7. Attach Rotunda Air Bag Simulator 105-00010 or equivalent to wiring harness in place of passenger side air bag module.
8. Connect positive battery cable.