AE RF Shock Actuator Desired Position Not Detected

Shock Absorber Electronic Actuator Desired Position Not Detected - RH Front

PINPOINT TEST AE: SHOCK ABSORBER ELECTRONIC ACTUATOR DESIRED POSITION NOT DETECTED-RH FRONT:

PINPOINT TEST AE: SHOCK ABSORBER ELECTRONIC ACTUATOR DESIRED POSITION NOT DETECTED-RH FRONT (Continued):

The Control Module did not receive a signal that right front shock absorber electronic actuator went to desired position when activated. There are eight possible causes of shock absorber electronic actuator not switching to desired position
1. SOFT and/or FIRM shock relay is inoperative.
2. SOFT or FIRM shock relay circuit is inoperative.
3. Vehicle wiring harness power supply circuit to right front shock absorber electronic actuator is shorted to ground or has an open in it.
4. Right front shock absorber electronic actuator position circuit is shorted to ground or has an open in it.
5. Vehicle wiring harness connector for right front shock absorber electronic actuator does not have all wires in correct location.
6. Right front shock absorber electronic actuator is inoperative.
7. Right front spring and shock assembly on vehicle is binding, preventing shock absorber electronic actuator from switching to desired position.
8. Air suspension control module is inoperative.