AF LF Shock Actuator Desired Position Not Detected

Shock Absorber Electronic Actuator Desired Position Not Detected - Left Front

PINPOINT TEST AF: SHOCK ABSORBER ELECTRONIC ACTUATOR DESIRED POSITION NOT DETECTED-LEFT FRONT:

PINPOINT TEST AF: SHOCK ABSORBER ELECTRONIC ACTUATOR DESIRED POSITION NOT DETECTED-LEFT FRONT (Continued):

The Control Module did not receive a signal that the left front shock absorber electronic actuator went to the desired position when activated. There are eight possible causes of the shock absorber electronic actuator not switching to the desired position.
1. SOFT and/or FIRM relay is inoperative.
2. SOFT or FIRM shock relay circuit is inoperative.
3. Vehicle wiring harness power supply circuit to left front shock absorber electronic actuator is shorted to ground or has an open in it.
4. Left front shock absorber electronic actuator position circuit is shorted to ground or has an open in it.
5. Vehicle wiring harness connector for left front shock absorber electronic actuator does not have all wires in correct location.
6. Left front shock absorber electronic actuator is inoperative.
7. Left front spring and shock assembly on vehicle is binding, preventing shock absorber electronic actuator from switching to desired position.
8. Control Module is inoperative.