Q Unable To Detect Raising of RF Corner
Unable to Detect Raising of Right Front Corner
PINPOINT TEST Q: UNABLE TO DETECT RAISING OF RIGHT FRONT CORNER:
PINPOINT TEST 0: UNABLE TO DETECT RAISING OF RIGHT FRONT CORNER (Continued):
PINPOINT TEST Q: UNABLE TO DETECT RAISING OF RIGHT FRONT CORNER (Continued):
PINPOINT TEST Q: UNABLE TO DETECT RAISING OF RIGHT FRONT CORNER (Continued):
PINPOINT TEST Q: UNABLE TO DETECT RAISING OF RIGHT FRONT CORNER (Continued):
PINPOINT TEST Q: UNABLE TO DETECT RAISING OF RIGHT FRONT CORNER (Continued):
PINPOINT TEST Q: UNABLE TO DETECT RAISING OF RIGHT FRONT CORNER (Continued):
The Control Module has not received the signal that the right front corner of the vehicle was raised during the Auto Test. There are nine possible causes which are listed below:
1. Air suspension height sensor linkage arm is not connected properly to vehicle and/or air suspension height sensor.
2. An air line may be inoperative.
3. Right front solenoid valve may be inoperative.
4. Right front air spring Battery Positive Voltage (B+) power supply circuit may have an open in it.
5. Right front air spring ground return circuit may have an open in it.
6. Air compressor may be inoperative.
7. Air compressor B+ power supply circuit may have an open in it.
8. Air compressor ground return circuit may have an open in it.
9. Control Module may be inoperative.