S Unable To Detect Raising of RR Corner

Unable to Detect Raising of Right Rear Corner

PINPOINT TESTS: UNABLE TO DETECT RAISING OF RIGHT REAR CORNER:

PINPOINT TEST S: UNABLE TO DETECT RAISING OF RIGHT REAR CORNER (Continued):

The Control Module has not received the signal that the right rear corner of the vehicle was raised during the Auto Test check. There are nine possible causes of this listed below:
1. Air suspension height sensor linkage arm is not connected properly to vehicle and/or height sensor.
2. An air line may be inoperative.
3. Right rear solenoid valve may be inoperative.
4. Right rear air spring Battery Positive Voltage (B+) power supply circuit may have an open in it.
5. Right rear air spring ground return circuit may have an open in it.
6. Air compressor may be inoperative.
7. Air compressor B+ power supply circuit may have an open in it.
8. Air compressor ground return circuit may have an open in it.
9. Control Module may be inoperative.