Variable Induction System: Specifications

Air Cleaner Tube Clamps 1.4-2.5 Nm (12-22 lb in)

EGR Valve Retaining Bolts 20-30 Nm (15-22 lb ft)

Engine Appearance Cover Retaining Nuts 7.0-9.0 Nm (61-79 lb in)

Fuel Injection Supply Manifold Retaining Bolts 8-12 Nm (71-106 lb in)

Generator Mounting Bracket Retaining Bolts and Nuts 8-12 Nm (71-106 lb in)

Ignition Wire Covers Retaining Nuts 2.0-4.0 Nm (18-35 lb in)

IMRC Actuator Retainers 8-12 Nm (71-106 lb in)

Intake Manifold Fasteners [1]

Fasteners 5, 7, 9 and 11 12-15 Nm (9-11 lb ft)

All other fasteners 18-22 Nm (13-16 lb ft)

Then tighten all fasteners in numerical sequence by rotating an additional 85-95 degrees.

Intake Manifold to IMRC Housing
Retaining Bolts A through D 8-10 Nm (71-89 lb in)

Tighten fasteners A through D an additional 85-95 degrees.

Water Bypass Tube Retaining Nuts 8-12 Nm (71-106 lb in)

[1] Tighten Fasteners 1 through 20 in Numerical Sequence