Clearing Trouble Codes

NOTE: Ford DOES NOT provide procedures other than those described to retrieve or clear trouble codes.

1. The original Diagnostic Trouble Code (DTC) in the anti-lock brake control module from the assembly plant will erase automatically if everything is in working order and the vehicle is driven about 40 km/h (25 mph).
2. All DTCs must be output, all concerns corrected (anti-lock indicator OFF), and vehicle driven about 40 km/h (25 mph) before the memory will clear.
3. The anti-lock control module will erase all stored DTCs if it counts 250 consecutive ignition RUN cycles without recognizing a fault.

NOTE: If on-board diagnostic pinpoint test steps continually lead you to reverify symptom, go to the anti-lock quick check test. Pinout Values and Diagnostic Parameters