KD2 - Check CANP Resistance

- Key "OFF".

- Canister Purge (CANP) solenoid disconnected.

- Measure CANP solenoid resistance.

- Is the resistance between 30 and 90 ohms?

Yes -- Remain in Output State test mode. CANP solenoid is OK electrically. Go to KD3. KD3 - Check Canister Purge Solenoid For Vacuum Leaks

No -- Exit Output State test mode. CANP solenoid is out of specification. Replace CANP solenoid. Drive vehicle to verify correction of driveability symptom. Rerun Quick Test. Quick Test Appendix (Detailed Testing Instructions)