Suspension Control ( Automatic - Electronic ): Adjustments

Fig. 25 Ride Height Adjustment:

FRONT SUSPENSION
The front suspension ride height or "C" dimension is adjusted by moving the front LH and/or RH lower sensor attaching stud. An adjustment slot is provided on the bracket. Loosen the retaining screw and adjust up or down as required.

NOTE: A 1.0 mm change in the height sensor attachment point results in approximately a 3.0 mm change at the "C" dimension.


REAR SUSPENSION
The rear suspension ride height, or "D" dimension, is adjusted by moving the LH rear height sensor upper ball stud bracket on the subframe. An adjustment slot is provided on the bracket. Loosen the retaining screws and adjust bracket up or down as required.

NOTE: A 1.0 change in the LH rear height sensor attachment point results in approximately a 3.0 mm change in the "D" dimension.