A/T - 4R70W Tipin Shudder/Downshift Bump
Article No.96-4-8
02/12/96
TRANSMISSION - 4R70W - TIP-IN SHUDDER AND/OR DOWNSHIFT BUMP
LINCOLN-MERCURY:
1996 MARK VIII
This TSB article is being republished in its entirety to include information on Powertrain Control Module (PCM) replacement approval.
CALIBRATION:
6-38L-R00, 6-38K-R00, 6-38Q-R00
WARNING:
THIS MODIFICATION IS AUTHORIZED ONLY FOR THE LISTED ENGINE. PERFORMING THIS MODIFICATION ON OTHER ENGINE CALIBRATIONS IS UNAUTHORIZED AND COULD CREATE LIABILITY UNDER APPLICABLE FEDERAL OR LOCAL LAWS.
ISSUE:
While in 4th gear, the driver may depress the accelerator pedal partially or fully which may result in a higher than expected increase in engine rpm followed by a bump during the downshift. There may also be a shudder while coasting down from a speed greater than 32 km/h (20 mph) (3rd gear) as the driver steps onto the accelerator pedal lightly at 24-29 km/h (15-18 mph) during the 3-2 downshift.
ACTION:
Replace or reprogram (using Service Bay Diagnostic System (SBDS)) the PCM with a new PCM (see Application Chart) which has revised calibrations to correct the above mentioned concerns. Refer to the 1996 Mark VIII Service Manual for removal and installation procedures.
NOTE:
DEALERS WITH SBDS ARE REQUIRED TO OBTAIN REGIONAL APPROVAL WHEN IT IS NECESSARY TO REPLACE THE PCM.
Obtain an Authorized Modifications Decal and list the date, dealer number, and summary of modifications performed. Select a prominent place adjacent to the Vehicle Emission Control Information Decal suitable for installing the Authorized Modifications Decal. Clean the area, install the decal, and cover it with a clear plastic decal shield.
PART NUMBER PART NAME
F6LZ-12A650-AC Powertrain control Module (PCM)
F6LZ-12A650-BC Powertrain control Module (PCM)
F6LZ-12A650-CC Powertrain control Module (PCM)
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 96-1-6
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION DESCRIPTION TIME
960408A Reprogram Powertrain 0.2 Hr.
Control Module (PCM)
960408B Replace Powertrain Control 0.4 Hr.
Module (PCM)
DEALER CODING
CONDITION
BASIC PART NO. CODE
RECAL 08
OASIS CODES: 502000, 504000, 610500, 703000