Programming The Keyless Entry System
To program an alternate code:1. Enter the five digit permanent entry code into keyless entry keypad.
2. Within five seconds of pressing last button of permanent code, press the 1/2 button within five seconds of pressing the last button of the permanent code. (Factory code found on the module).
3. Enter any alternate five digit code within five seconds of pressing 112 button.
^ Enter a sixth digit as follows to indicate operator's memory seat setting to be set by alternate code:
9/0-- no memory recall
1/2-- memory seat position 1
314-- memory seat position 2
5/6-- memory seat position 3
^ After successful programming, the doors will signal by locking and then unlocking.