Torque Specifications

Alternator To Cylinder Block 15-22 ft lb
Camshaft Bolt 81-95 ft lb
Camshaft Cover Bolt 6-9 ft lb
Connecting Rod Bolt 29-34 ft lb [01]
Cylinder Front Cover Bolt 15-22 ft lb
Cylinder Head Bolt [02]
Damper To Crankshaft Bolt 114-121 ft lb
EGR Valve To Intake Manifold 15-22 ft lb
Exhaust Manifold To Cylinder Head Bolt 15-22 ft lb
Exhaust Pipe To Exhaust Manifold 20-30 ft lb
Flexplate to Crankshaft 54-64 ft lb
Front Engine Mount Attaching Bolts 45-59 ft lb
Front Engine Mount Through Bolts 15-22 ft lb
Intake Manifold To Cylinder Head Bolt 15-22 ft lb [03]
Oil Inlet Tube To Main Bearing Cap 15-22 ft lb
Oil Inlet Tube To Oil Pump Bolt 6-8.8 ft lb
Oil Pan Drain Plug 8-12 ft lb
Oil Pan To Cylinder Block 15-22 ft lb
Oil Pump To Cylinder Block 6-9 ft lb
Rear Engine Mount Attaching Bolt 50-70 ft lb
Rear Engine Mount Attaching Nut 35-50 ft lb
Spark Plug 7-8 ft lb
Thermostat Housing 15-22 ft lb
Water Pump To Cylinder Block 15-22 ft lb
Water Pump To Pulley Bolt 15-22 ft lb

[01] -- Rotate an additional 90-120 degrees.
[02] -- Refer to cylinder head replacement procedure.
[03] -- After assembly retighten with engine hot.