Single Switch
Single SwitchNOTE: Testing of the window regulator control switches should be performed with the window regulator control switches removed from the vehicle. Use a self-powered test lamp or Rotunda Digital Volt-Ohmmeter 014-00407 or equivalent.
1. With window regulator control switch in the NEUTRAL position, there should be continuity between terminals 1 and 2.
2. With window regulator control switch pushed downward, there should be continuity between terminals 2, 4 and 5, and 1 and 3. Terminal 6 should not have continuity with any other terminal.
3. With window regulator control switch pushed upward, there should be continuity between terminals 2, 3 and 5, and 4 and 6. Terminal 1 should not have continuity with any other terminal.
4. If the window regulator control switch does not test as outlined, replace the window regulator control switch.