Front Door Window Glass: Service and Repair

REMOVAL
1. Remove door trim panel and watershield. Doors
2. Remove inside door belt weatherstrip assembly.
3. Lower glass to access holes in door inner panel. Remove two nuts retaining glass-to-glass bracket.
4. Remove front door window glass by tipping it forward and then removing it from between door belt opening to outboard side of door.

INSTALLATION
1. Install front door window glass into door at belt. Make sure that glass is set within front and rear glass run retainers.
2. Position front door window glass to glass bracket. Install two nuts to secure glass to glass bracket. Tighten to 4-7 Nm (35-61 lb-in).
3. Install inside door belt weatherstrip assembly.
4. Install door trim panel and watershield.