Fore-and-Aft Adjustment

1. Operate roof sliding outer glass panel to the full-open position.
2. Loosen 12 screws (including the single bolt at each front roof sliding panel rail corner) retaining the adjustable side rail covers.
3. Locate and use the series of hash marks at each front roof sliding panel rail corner. Adjust roof sliding outer glass panel fore or aft as required, making sure both sides are uniform to hash marks.
4. Tighten all retaining screws.

CAUTION: Hand-tighten all screws. DO NOT use air tools or damage to holes in roof sliding panel housing may occur.