Sliding Roof Panel

REMOVAL
1. Open glass panel and sunshade fully.
2. Remove eight screws retaining the sides of the sun roof module.

NOTE: Do not remove the rear cover plate screws located second from rear on each side.







3. Remove four screws retaining the front of the sun roof module.
4. Close glass panel.

NOTE: Mask roof panel in front of sun roof opening to prevent scratches.

5. Remove sun roof motor.
6. Remove two transmission screws at the rear of sun roof housing.
7. Remove the sun roof module, lifting up and forward.

CAUTION: Always handle module by glass panel and avoid squeezing module to prevent damaging components.







INSTALLATION
1. Follow removal procedure in reverse order.