A/C Cycling Switch

REMOVAL







1. Remove radiator upper sight shield to access A/C cycling switch.
2. Remove two screws retaining windshield washer reservoir filler neck to fender brace.
3. Remove two screws from power steering fluid reservoir and move reservoir aside to access A/C cycling switch.
4. Disconnect wire harness connector from A/C cycling switch.
5. Unscrew A/C cycling switch from top of suction accumulator/drier.







INSTALLATION
1. Lubricate O-ring seal with clean refrigerant oil.
2. Screw A/C cycling switch on suction accumulator/drier and tighten A/C cycling switch hand-tight.
3. Connect wire harness connector to A/C cycling switch.
4. Install power steering fluid reservoir with two retaining screws.
5. Install radiator upper sight shield.
6. Check system for proper operation.