Control Module HVAC: Service and Repair

REMOVAL







1. Disengage two pushpins retaining instrument panel insulator to instrument panel. Disconnect courtesy lamp from instrument panel insulator.
2. Working from under instrument panel, disconnect electrical harness connectors from A/C blower motor speed control.
3. Disconnect vacuum harness connector from its mounting bracket.
4. Remove two screws retaining A/C blower motor speed control to A/C evaporator housing and remove A/C blower motor speed control.







5. Note location of mounting brackets on removed A/C blower motor speed control. Transfer mounting brackets from removed A/C blower motor speed control to replacement A/C blower motor speed control.

INSTALLATION
1. Follow removal procedure in reverse order.
2. Check system for proper operation.