Attachment II - Labor/Parts Information
Labor AllowancesInspect the Vehicle Dynamics 0.2 Hrs. Labor Operation 97E09A
Module and Return Vehicle to
Owner
Inspect and Replace the 0.3 Hr. Labor Operation 97R09M
Vehicle Dynamics Module
Parts Requirements
Parts will not be direct shipped for this program. Order your parts requirements as follows:
Stock orders Effective immediately Normal order process
Interim orders Effective immediately Normal order process
Emergency orders On or after 9/15/97 Normal order process
Emergency orders Prior to 9/15/97 Call 1-800-325-5621
Parts Return Instructions
Hold the replaced modules until the claim is paid and the parts department receives WPRC "parts disposition instructions" on your daily Parts Advice Register. Direct your questions on warranty part returns to the WPRC at 1-800-416-9772.
PART NUMBER DESCRIPTION
F70Z-5A919-BRM Vehicle Dynamics Module
Dealer Price
For latest prices, check or call your:
^ Order Processing Center
^ DOES II
^ Updated Price Book
Excess Stock Return
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.
Claims Preparation
Enter using DWE
Use code information as shown:
^ Program Code - 97B09
^ Labor Operation - See Above
See Sections 5 & 6 of the ACESII manual for detailed instructions. Refer to ACESII manual for core claiming instructions.
Service Procedure
1. Turn ignition switch to Off position.
2. Turn air suspension service switch to Off position. Switch is located in the left rear corner of the luggage compartment.
3. Unsnap VDM from its mounting clips and remove from vehicle. See figure 2.
4. Install new VDM in its mounting clips.
5. Connect VDM electrical connector.
6. Snap module tray in installed position.
7. Snap upper luggage compartment trim panel in installed position
8. Turn air suspension service switch to ON position.