Front
NOTE: Do not check alignment without first making the following inspection for front end damage or wear:1. Check for specified air pressure in all four tires.
2. Turn air suspension switch OFF (located in LH side of luggage compartment).
3. Raise front of vehicle off floor. Grasping upper and lower surfaces of tire, move each front wheel in and out to check front suspension ball joints and mounts for looseness, wear and damage. Tighten all loose nuts and bolts to specification. Replace all worn parts.
4. Check steering gear mountings and tie rod connections for looseness. Tighten all mountings to specification. If tie rod ends or front wheel spindle tie rods are worn or bent, replace.
5. Spin each front wheel with wheel spinner and check and balance each wheel as necessary.
6. Inspect shock absorber (strut).
7. Lower vehicle and turn the air suspension switch ON.