Window Glass: Adjustments

Door, Front:

Door, Rear:

Door Glass Height Stop Adjustment

NOTE: Before making any adjustments, remove the front door trim panel and front door trim shield.

1. Loosen, but do not remove, upper front door power window regulator retaining nuts.
2. Raise front door window glass to full up position and tighten nuts to 9-14 Nm (80-123 lb-in).
3. Loosen, but do not remove, front door glass run front retainer screw.
4. Lower front door window glass to full down position and tighten retainer nuts to 9-14 Nm (80-123 lb-in).