Driver/Vehicle Information Display
Description and Operation
Testing and Inspection- Initial Inspection and Diagnostic Overview
- Diagnostic Trouble Code Tests and Associated Procedures
- Symptom Related Diagnostic Procedures
- Pinpoint Tests
- B1201: Fuel Sender Circuit Failure
- B1204: Fuel Sender Circuit Short to Ground
- B1205: EIC Switch-1 Assembly Circuit Failure
- B1208: EIC Switch-1 Assembly Circuit Short to Ground
- B1209: EIC Switch-2 Assembly Circuit Failure
- B1212: EIC Switch-2 Assembly Circuit Short to Ground
- B1342: ECU Defective
- B1389: Oil Temperature Sensor Circuit Failure
- B1390: Oil Temperature Sensor Circuit Short to Ground
- B1676: Battery Voltage Out of Range
- A: DTC B1205 and DTC B1209 EIC Switch Failure
- B: No Communication With Message Center Indicator Module
- C: Message Center Switch Not Operating Properly
- D: Clock Display Malfunction
- E: Fuel Computer Range Malfunction
- F: Fuel Computer Fuel Remaining Malfunction
- G: Fuel Computer Economy Malfunction
- H: Air Suspension Switch Warning Erroneous
- J: Air Suspension System Warning Is Incorrect
- K: Engine Coolant Level Warning Not Operating Properly
- L: Oil Level Warning Not Operating Properly
- M: Washer Fluid Level Warning Not Operating Properly
- N: Traction Control Off Indicator Never/Always On
- Component Tests and General Diagnostics
- Scan Tool Testing and Procedures
- Pinout Values and Diagnostic Parameters
Service and Repair
Diagrams
Specifications
Technical Service Bulletins
Tools and Equipment