Sunroof / Moonroof: Adjustments

TOLERANCE FOR FLUSHNESS TO ROOF







1. Swing the LH and the RH sight shields rearward.
1 Unclip the front.







2. Loosen the LH and the RH Torx(R) screws.







3. Adjust the front glass edge to flush 1.0 mm (0.04 inch) low.







4. Adjust the rear glass edge to flush 1.0 mm (0.04 inch) high.







5. Tighten the LH and the RH Torx(R) screws.






6. Install the LH and the RH sight shields.