Programmable Seat

The memory seat system allows automatic positioning of the driver seat to two programmable positions using the memory switch located on the driver front door trim panel, the key fob or the keypad on the door.
- To program position one, press button 1, then move driver seat to desired position using manual controls. Two seconds after moving the seat, a message appears on the message center "SAVED TO DRIVER 1".
- To program position two, repeat the previous procedure using button 2.
- To recall position one, press button 1.
- To recall position two, press button 2.
- A position can only be recalled when the transmission range selector is in PARK or NEUTRAL.
- If the memory has been lost due to power being removed from the vehicle, the memory positions will be updated when the ignition switch is first turned to RUN. These positions are stored in the driver seat module.
- If the sensors on the seat track are not connected, the memory or manual system will not work.