Operation CHARM: Car repair manuals for everyone.

Air Bag Control Module: Service and Repair

REMOVAL
1. Disconnect the battery ground cable. Wait for one minute for the backup power supply energy to be depleted.
2. Remove the message center.
3. Remove center radio finish panel.






4. Using Radio Removal Tool T87P-19061-A, remove the radio.






5. Remove the air bag diagnostic monitor.
1 Remove the screws.
2 Disconnect the electrical connector.
3 Remove the air bag diagnostic monitor.

INSTALLATION






1. Install the air bag diagnostic monitor.
1 Position the air bag diagnostic monitor.
2 Connect the electrical connector.
3 Install the screws.






2. Install the radio.
3. Install the message center.
4. Install the center radio finish panel.
5. Connect the battery ground cable.
6. Prove out the air bag system.