Connecting Rod

General
Bearing Bore 56.866-56.886 mm (2.2388-2.2396 inch)
Bend Limit [2] 0.038 mm (0.00150 inch) per 25 mm (0.9843 inch)
Length [1] 150.7 mm (5.9331 inch)
Piston Pin Bore 22.012-22.024 mm (0.8666-0.8671 inch)
Side Clearance
Standard 0.15-0.45 mm (0.0059-0.0177 inch)
Limit, Maximum 0.50 mm (0.00197 inch)
Twist Limit [2] 0.050 mm (0.00197 inch) per 25 mm (0.9843 inch)

Tightening Specifications
Tighten nuts evenly, in two steps.
Step 1 ... Alternately tighten new bolts in several passes to obtain 25-35 Nm (19-25 ft. lbs.)
Step 2 ...Rotate an additional 85-95°.

[1] Center to center.
[2] Pin bore and crank bearing bore must be parallel and in same vertical plane within the specified total difference when measured at the ends of a 203 mm (7.992 inch) bar, 101.5 mm (3.9961 inch) on each side of rod centerline.