Steering Column/Ignition/Lighting (SCIL) Module

REMOVAL







1. Disconnect the battery ground cable.

CAUTION: Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.

2. Remove the glove compartment.







3. Remove the screws from the Steering Column/Ignition/Lighting Control (SCIL) module mounting bracket.







4. Lift and slide the SCIL module downward.







5. Disconnect the four electrical connectors.

INSTALLATION







1. To install, reverse the removal procedure.

NOTE:
- When replacing the SCIL module it is necessary to reprogram the ignition keys.
- When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.