Keyless Entry Transmitter: Description and Operation

NOTE: The electronic door lock control system will not function when the ignition switch is in the RUN or ACC position.

^ The electronic door lock control system includes two four-button (hand-held) keyless entry remote transmitters. Up to four transmitters can be programmed to a single vehicle. Keyless entry remote transmitters are reprogrammable and all keyless entry remote transmitters for the vehicle must be programmed in the same session. When troubleshooting the system, one keyless entry remote transmitter is essential to perform tests.
^ To unlock the driver front door, press the UNLOCK button once on a keyless entry remote transmitter which is programmed into the driver door module.
^ Unlock will also disarm the anti-theft alarm control.
^ To unlock both front doors, press the UNLOCK button on the keyless entry remote transmitter a second time within five seconds of the first unlock.
^ If more than five seconds have elapsed since the first press of the UNLOCK button, pressing the UNLOCK button again will only unlock the driver front door.
^ To unlock the luggage compartment door, press the TRUNK button twice on the keyless entry remote transmitter.
^ To turn on interior lamps and door lock cylinder illumination, press any of the keyless entry remote transmitter buttons-UNLOCK, TRUNK or PANIC.
^ Security lighting will turn on exterior lamps at low ambient light levels (with Autolamps on) when the transmitter unlock button is depressed.
^ To lock both doors and arm the anti-theft alarm control, (if equipped), press LOCK button once on the keyless entry remote transmitter.
^ To confirm that both doors have locked, press LOCK button again within five seconds of the first press. This will sound the horn and lock both doors again.