Seat Track: Service and Repair

REMOVAL
1. Remove seat and track assembly.
2. Place the seat and track assembly upside down on a clean bench.
3. Disconnect seat regulator control switch from front seat track assembly at connectors.
4. Remove front seat track lower shield from the outboard side of front seat track assembly (if equipped).
5. Remove four bolts retaining front seat track assembly to the front seat cushion frame and spring.
6. Remove nut retaining front safety belt buckle end to front seat track assembly, disconnect harness connector and remove front safety belt buckle end.
7. Remove front seat center passenger belt from mounting slot and remove front seat track assembly from the front seat cushion frame and spring.

INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten bolts retaining front seat track to front seat cushion frame and spring to 17-23 Nm (13-16 Lb-Ft). Tighten front safety belt buckle end to front seat track retaining nut to 34-46 Nm (26-33 Lb-Ft).
3. Check seat for proper operation.