Quick Test 1.0 - Visual Inspection

DESCRIPTION
Perform the Visual Check and Vehicle Preparation procedure.

PROCEDURE
Inspect the following:
- air cleaner and inlet ducting.
- all engine vacuum hoses for damage: leaks, cracks blockage, proper routing, etc.
- Powertrain Control Module (PCM) system wiring harnesses for proper connections, bent or broken pins, corrosion, loose wires, proper routing, etc.
- PCM, sensors, and actuators for physical damage.
- engine coolant for proper level.
- transmission fluid for proper level and condition.
- any non-factory installed items wired into the transmission or PCM harnesses.
- Perform all necessary servicing before continuing with Quick Tests.