Operation CHARM: Car repair manuals for everyone.

Antenna Removal - Passive Antitheft System (PATS)

REMOVAL
1. Remove the ignition switch lock cylinder.







2. Remove ignition switch bezel.







3. Remove the ignition lock cylinder housing from the instrument panel.
1 Remove the screws.
2 Disconnect the electrical connector.

NOTE: It is not necessary to disconnect the ignition switch connector.







4. Remove the Passive Anti-Theft System (PATS) antenna.
1 Remove the screw.
2 Pull the PATS antenna off the ignition lock cylinder housing.

INSTALLATION
1. To install, reverse the removal procedure.