Water Pump: Service and Repair

REMOVAL
1. Drain the engine cooling system.
2. Remove the drive belt.





3. Remove the bolts and remove the water pump pulley.





4. Remove the bolts and remove the water pump.
- Clean and inspect the mating surfaces.

INSTALLATION





1. Install the water pump.
1 Lubricate and install the O-ring seal.
- Use Ford Premium Engine Coolant E2FZ-19549-AA (in Oregon, F5FZ-19549-CC, in Canada, CXC-8-B) or equivalent meeting Ford specification ESE-M97B44-A.

2 Loosely install the four bolts.






2. Install the water pump and tighten the bolts.





3. Install the water water pump pulley and tighten the bolts.
4. Install the drive belt.
5. Fill the engine cooling system.