Compass Calibration Adjustment

NOTE: For optimum calibration, turn OFF all electrical accessories and verify all of the doors are closed.

1. Find an open area that is free of steel structures and high voltage lines.







2. Press and hold the COMPASS button, then press the RESET button. The message center will display the following:
- ECO>ZONE
- RSET>CAL







3. Press the reset button to enter the Calibration mode. The display Will now show:
- CIRCLE SLOWLY TO CAL
4. Slowly drive the vehicle (less than 5 km/h [3 mph]) in circles until the message center displays a direction instead of the CIRCLE SLOWLY TO CAL message.

NOTE: The CIRCLE SLOWLY TO CAL message should change to a direction within five circles.