Headlamp: Adjustments

NOTE: Horizontal aim must be adjusted first.

1. Position the vehicle on a level surface.







2. Make sure the air suspension switch is in the ON position.
3. Start the engine and open the driver door.







4. Apply pressure to the front bumper of the vehicle.
5. Close the driver door and allow the front of the vehicle to level.







6. Apply pressure to the rear bumper of the vehicle.
7. Open and close the driver door and allow the vehicle to level.







8. Remove the radiator upper sight shield.
9. Adjust the vertical aim adjustment screw until the bubble in the level is centered.